FEATURED WORK TRUCK & FLEET INVERTERS
3000 Watt Pure Sine Inverter Charger ETL Listed to UL 458Â
This heavy-duty unit combines a pure sine inverter, multi-stage smart charger, and automatic transfer switch to power clean 120 VAC loads and recharge auxiliary batteries.
- Best For: Utility service trucks, emergency vehicles, and mobile diagnostic stations running sensitive electronics
- Output: 3000 watts continuous clean sine wave power at 120 VAC from a 12V truck battery input
- Surge: 9000 watts peak surge for 20 seconds to handle motor startups and inductive loads
- Key Specs: Multi-stage smart battery charger, ETL listed to UL 458 and CSA 22.2, built-in remote switch port, and full overload protection
3000 Watt Power Inverter GFCI ETL Certified to UL 458
A high-output modified sine wave inverter with dual GFCI outlets built to run resistive power tools, lights, and job-site equipment.
- Best For: Construction work trucks, field repair trailers, and fleet utility beds
- Output: 3000 watts continuous modified sine wave output at 120 VAC
- Surge: 6000 watts peak surge capacity for high-draw equipment startup
- Key Specs: Dual GFCI outlets, direct-connect terminal block, low voltage alarm, and thermal short circuit shutdown
2000 Watt Industrial Pure Sine Inverter, ETL Listed to UL 458 / CSA
A rugged low frequency pure sine inverter for service trucks that need clean AC power on the go, without a charger or transfer switch to pay for.
- Best For: Service vans, municipal fleet vehicles, and mobile field workstations
- Output: 2000 watts continuous pure sine wave power at 120 VAC from a 12V truck battery
- Surge: 6000 watts for 20 seconds, a 300% surge that starts motors and high-draw tools
- Key Specs: Low frequency transformer build, ETL listed to UL 458 and CSA, marine coated boards, and a 3 year warranty
APPLICATIONS
Find the Right Products for Your Build
Solar
Installers
Match inverters and chargers to array sizes and battery capacity for off-grid residential and commercial setups.
RV Manufacturers and Dealers
Spec pure sine power to run coach electronics, appliances, and onboard 120/240 VAC systems cleanly.
Work Trucks and Fleet Vehicles
Run tools, diagnostic equipment, and job-site lighting off an auxiliary battery bank without idling the engine, using a pure sine inverter sized to the truck’s heaviest startup load.
OEMs and Upfitters
Integrate certified power platforms directly into custom manufacturing builds with dedicated volume pricing and technical support.
BUS & VAN MANUFACTURERS AND OPERATORS
Deliver regulated 120 VAC power for passenger electronics, auxiliary lighting, and onboard amenities.
TESTIMONIAL
Trusted by the People Who Do the Work
Richard Fairbanks
I am a monk, and have been camped out in the remote wilderness of Utah for eighteen years. I have been living off of AIMS inverters for the past fourteen years, running many high-load power tools, and their reliability and the AIMS customer service have made me a devotee. I am particularly fond of their pure sine wave inverters!
Jonah Nside
Andrew over at AIMS is who you need for your install. I called Andrew probably more than any of their customers. Every time he had a def answer for every question I had. We engineered a $15,000 system for my 1 & only battery operated food truck.
Jason
Used the 2000W Pure Sine wave model for a hunting trip to Canada. 4,000 miles on the road including the ROUGH off roading in back country. The power supply worked perfect powering a 15cuft chest freezer in the truck bed the whole trip.
Â
THE AIMS ADVANTAGE
Why Choose AIMS Power
Work truck power systems face continuous vibration, wide temperature swings, and fluctuating alternator outputs. Our engineering team sizes the complete DC circuit together, matching the inverter, inline fuse blocks, and auxiliary battery bank to prevent voltage drop and premature component wear.
COMMON QUESTIONS
Frequently Asked Questions
Calculate the combined continuous wattage of all equipment running at the same time, then check the motor startup requirements. High-demand tools like an air compressor, table saw, or heavy-duty power inverter load often need three times their running watt rating to start under full load without triggering an overload fault condition. To determine the exact capacity and battery requirements for your specific tool lineup, use the AIMS Power Inverter Calculator to match total wattage, surge demand, and run time before selecting a unit.
Operating an inverter off an auxiliary deep cycle battery bank allows technicians to run power tools, test benches, and sleeper cab amenities with the vehicle engine turned off. This cuts fuel consumption on the job site, reduces maintenance intervals on the vehicle alternator, and limits wear on diesel aftertreatment systems.
A pure sine wave inverter delivers utility-grade AC power that keeps sensitive electronics, variable-speed power tools, diagnostic computers, and multi-bay battery charger setups running cool without electrical interference. A modified sine wave model offers a practical, lower-cost alternative for basic resistive loads, work lights, and simple electric motors.
Drawing continuous output over 1000 watts directly from a standard truck battery can drain the starting bank and cause low voltage shutdowns. Adding an auxiliary battery bank isolated from the starter battery keeps power flowing to your tools while protecting the vehicle’s starting capability.
High DC current draw over extended distances causes significant voltage drop if the wire gauge is undersized. Use thick, pre-assembled copper cables paired with an inline circuit breaker or fuse block sized to your inverter’s maximum continuous and surge current to ensure safe, stable operation in the field.
Related Products
-
FREE FOLDABLE SOLAR PANEL Portable Rugged Power Station & Solar Generator 3.1 kWh for Camping, Backup, and Job Sites
Original price was: $2,600.00.$2,190.00Current price is: $2,190.00.
